Application method
 When use may use the hair brush to take the little soft soap or thelaundry powder gently cleans the filter interior and the surfacecleanly, uses the running water and the distilled water flushing inturn is clean, after fills in O figure rubber assemblies, after thenpasses the vapor 30 minutes antiseptically then to use.
Meets on the yummy treats fluid pipeline, will expect the fluid to putin the filter from the top downward by the pipeline, slightly willdeflate, will discharge the filter interior the air, (otherwiseinfluence rate of percolation) then will carry on filters.
The normal use filter, had ended after the production, turns on thefilter, except the filter diaphragm, is clean with the distilled waterflushing, after will be allowed to fill installs the pipeline seriesto pass the vapor 30 minute antiseptic next time to use. |
|
Specification and reference data
| Spec.£¨mm£© |
Working pressure
(kg/cm3) |
Filters the material pore filter diaphragm(um) |
Water current capacity
(ton/hour) |
Unit |
| ¦µ25 |
0.5-1 |
0.8 |
0.015 |
set |
| ¦µ50 |
0.5-1 |
0.8 |
0.02 |
set |
| ¦µ60 |
0.5-1 |
0.8 |
0.024 |
set |
| ¦µ100 |
0.5-1 |
0.8 |
0.067 |
set |
| ¦µ150 |
0.5-1 |
0.8 |
0.15 |
set |
| ¦µ200 |
0.5-1 |
0.8 |
0.27 |
set |
| ¦µ300 |
0.5-1 |
0.8 |
0.6 |
set |
|
